How
to use the seal
¡¤Drill
the thread through the lock hole, put both sides into the two
holes of lock core, strengthen and bent it to the back side,
cut the superfluous part, insert the seal to bottom.
¡¤Then, use the
special seal grip to clamp, by working with the seal module,
stamp the words of managing area, work kinds, worker No.and
year.
Fill up the Seal Management Card according to the requirements,
give back to the Measure Management Department to be recorded
or input to PC management system for later check.
Anti-false seal general test and identify
methods
¡¤When test,
first check if it is damaged by human action, check the No.,
work kind, worker No. and year. Then use the "Anti-false
seal general tester" to check if the sign will be changed
by clear to red under purple light.
Sealed anti-false seal test and identify
system
¡¤Follow the
process in User's Manual of < Sealed anti-false seal test
and identify system.
|
